Home > HB Fuller >

48173/58173 Double Bubble Epoxy Non-Sag Extra Fast Setting Red Package, 100 Packs per Box 04001
04001 Double Bubble Epoxy  Non-Sag Extra Fast Setting Red Package 04001
48173/58173 Double Bubble Epoxy Non-Sag Extra Fast Setting Red Package 04001


 
All products shipped with manufacturer certificates!
Our Price: $122.00

Product Code: 04001
Qty:

Description Extended Information
 

DOUBLE/BUBBLE®

High Performance Adhesives

NEW PN
90068-100

48173/58173 is an extra fast setting, two–component, room temperature curing epoxy adhesive. The system will cure at as low as –18 °C (0 °F). It has a convenient mix ratio, excellent cohesive strength and bonds to most substrates including metal, wood, concrete, ceramics and many plastics. It is recommended for fast patching, fixturing and other repairs requiring quick handling strength. Two slower setting versions of this system are also available; 58185 which sets in approximately 10 minutes, and 58269 which sets in approximately 20 minutes.

This Extra-Fast Setting Epoxy is an excellent, general-purpose adhesive. It is recommended for the following substrates: Metals, Carbon Steel, Stainless Steel, Aluminum, Plastics, Epoxy, Stone, Wood, Glass, China, and Leather. 48173/58173 is available in the unique DOUBLE/BUBBLE® job sized package as reorder no. 04001 (it contains 100 packs per box).

Technology / Base Epoxy

Type of Product Structural Adhesive

Components Two Component

Curing Room Temperature (secondary thermal cure)

Appearance / Color Amber

Consistency Liquid

Features and Benefits

  • Room temperature cure
  • Extra fast setting
  • Excellent cohesive strength

General Instructions

Fast-Setting Epoxy can be used to repair tools, auto parts, electrical and electronic components, furniture and other applications that require a fast-setting adhesive. Surface must be clean and dry before application. Remove all chemicals, dirt, wax and oil. To obtain the best cured properties, accurate proportioning and thorough mixing are essential.


Storage

These materials should be stored in a dry environment within a temperature range of 16 °C to 27 °C (60 °F to 80 °F). Extremes of temperature beyond this range may result in crystallization or polymerization of the materials. Introduction of a nitrogen blanket into the containers before closing will improve the storage life of the products and reduce the possible color change due to moisture contamination.



Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

HB Fuller
HB Fuller > Epoxy Adhesives