Home > Piston Oils >

Phillips 66 Victory Aviation Oil 100AW - 12 QT Case
Phillips 66 Victory Aviation Oil 100AW - 12 QT Case
Phillips 66 Victory Aviation Oil 100AW - 12 QT Case


 
All products shipped with manufacturer certificates!
Our Price: $86.00

Product Code: 1059152
Qty:

Description Extended Information
 
Victory Aviation Oil 100AWPhillips 66 Victory
Aviation Oil 100AW is an ashless dispersant, single-grade engine oil
pre-blended with the proper concentration of antiscuff/antiwear additive
(LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service
Instruction 1409C. It is recommended for use in opposed piston and radial piston
aircraft engines where cam lifter wear is a concern.The ashless dispersant
formulation helps minimize the formation of engine sludge, varnish, piston
deposits and combustion chamber deposits, resulting in a much cleaner engine
compared with the use of straight (nondispersant) mineral oils. This oil has a
high viscosity index and low pour point compared with many other single-grade
aircraft engine oils, allowing its use over a wide temperature range.Victory
Aviation Oil 100AW is FAA approved as an alternate method of compliance to
AD80-04-03 R2, paragraph b.1.



Applications



Opposed piston aircraft engines, especially where cam lifter wear is a
concernVictory Aviation Oil 100AW meets the requirements of:


Avco Lycoming Material Specifi cation No. 301G


Pratt & Whitney Service Bulletin No. 1183 Rev. U


SAE Standard J1899 Teledyne Continental Material Specifi cation
MHS-24B


U.S. Military Specifi cation MIL-L-22851D (obsolete) for additive
treatmentQPL approval number: D07L2-50



Features/Benefits




Ashless dispersant helps minimize engine sludge and varnish deposits
for a cleaner engine


Pre-blended with Lycoming-approved antiwear additive


High fi lm strength for protection against wear and piston scuffing


High viscosity index and low pour point for use over a wide
temperature range Protects against rust and corrosion


Formulated with the same high-quality base oils as used in Phillips 66
X/C Aviation Oil























Applications:


Opposed piston aircraft engines that require
an SAE 50 or Commercial Grade   100
engine oil (Type A 100AD)


Radial piston aircraft engines that require
an SAE 60 or Commercial Grade   120
engine oil (Type A 120AD)   Type A
Aviation Oil meets the requirements of:  



Avco
Lycoming Material Specification No. 301G  



Pratt
& Whitney Service Bulletin No. 1183 Rev. U






Teledyne
Continental Material Specification MHS-24B  



U.S.
Military Specification MIL-L-22851D (obsolete) for additive treatment   QPL Approval Numbers: D07L1-50 (Type A
100AD), D07L1-60 (Type A 120AD)






Features
& Benefits


Ashless
dispersant helps minimize engine sludge and varnish deposits for a cleaner
engine


High film
strength for protection against wear and piston scuffing Protects
against rust and corrosion
Formulated with the same high-quality base oils as used in Phillips 66 X/C
Aviation Oil





Opposed
piston aircraft engines that require an SAE 50 or Commercial Grade 100 engine
oil (Type A 100AD)


Radial
piston aircraft engines that require an SAE 60 or Commercial Grade 120 engine
oil (Type A 120AD)





-->

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Piston Oils
Chemical