Navigate to the Aircraft Shop Supply homepage

Home >
HB Fuller EY3804 (PT) Graphite Composite Repair Compound

Fiber Resin EY3804 | Pint Kit

HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 1 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 2 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 3 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 1 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 2 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 3 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 1 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 2 of 0
HB Fuller EY3804 (PT) Graphite Composite Repair Compound - Image 3 of 0

Fiber Resin EY-3804 | HB Fuller | BMS8-301 CI2 | - Pint Kit

HB Fuller - Fiber Resin
$

All products shipped with manufacturer certificates!
Product Code: EY-3804-PT
Usually Ships in 6 to 8 Weeks
View discounts
FIBER RESIN EY3804
GRAPHITE COMPOSITE REPAIR COMPOUND


MANUFACTURER
H.B. Fuller

DESCRIPTION
EY3804 A/B is a low viscosity, two-component epoxy system that offers low temperature cure, high temperature strength, and excellent resistance to hot water immersion. These properties make EY3804 an excellent choice for field repair of composite components.

EY3804 may be considered as a permanent repair for service temperatures to 200F. It is also qualified to Boeing specification BMS 8-301J, Class 2.

SPECIFICATION
BMS8-301 CI2

MIX RATIO
Mix 100 parts by weight of EY3804A Resin with 66 parts by weight of EY3804B hardener.

POT LIFE
The pot life of EY3804 A/B is 40-50 minutes in a 166 gram mass.

CURE CYCLE
EY3804 was designed as a room temperature curing epoxy to develop 300F strength with short term aging. Cure can be greatly accelerated with moderate heat, as with heat lamps or a field repair heat source. A heating time of three hours at 150F in the bond line will provide a full cure.

PHYSICAL PROPERTIES



STORAGE
Part A<40F = 6 months >40-80F = 3 months
Part B<40F = 12 months >40-80F = 12 months

SAFETY AND HANDLING
As with all resin systems, liquid and vapor may cause irritation to some people. Avoid contact with skin and use adequate ventilation. Wash skin with soap and water. Flush eyes with water copiously and get medical attention.
Use good personal hygiene. Avoid eye and skin contact. Wash contaminated clothing before reuse. Store material in a closed container in a cool, dry place.
Since emptied containers retain product residue, follow label warnings even after container is emptied.
Storage in areas above 80 deg. F may reduce shelf life. Consult Material Safety Data Sheet for further information.

CAUTION
Part A: May cause eye and skin irritation. Potential skin sensitizer.
Part B: Warning: May cause burns. Since emptied containers retain product residue, follow label warnings even after container is emptied.
Aircraft Shop Supply | Aircraft Parts

Reviews

Average Rating:
( 0 )
Empty Cart