Home > Piston Oils >

AeroShell 100 (Qt) | Piston Engine Oil
Aeroshell 100 (Qt)

Our Price: $7.30

Volume discounts:
Send RFQ to sales@145.aero

Manufacturer's Certificate of Conformance (CoC) included

We do International Shipping

Availability:: Usually Ships in 24 Hours
Product Code: 550041171


Aeroshell 100 Mineral Oil

Click here to shop for 55 Gallon Drum

Click here to shop for 6 QT Case


AeroShell Oils are available in four different viscosity grades:

AeroShell Oil 65 – AeroShell Oil 80 – AeroShell Oil 100 – AeroShell Oil 120

The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds.

The appropriate grades of these AeroShell Oils are approved for use in four-stroke (four- cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

  • SAE viscosity grade: 50
  • Density @ 15°C kg/l: 0.886
  • Kinematic viscosity mm²/s:
@ 100°C: 19.7
@ 40°C: 230
  • Viscosity index: Above 94
  • Pourpoint °C: Below –17
  • Flashpoint Cleveland: Above 250
Open Cup °C
  • Total acidity mgKOH/g: <0.1
  • Sulphur %m: 0.48
  • Copper corrosion @ 100°C: 1
  • Ash content %m: 0.006

  • U.S. J-1966 SAE Grade 50 - MIL-L-6082E.
  • British J-1966 SAE Grade 50
  • French (AIR 3560/D Grade SAE 50)
  • Russian MS-20
  • NATO Code O-117 Obsolete
  • Joint Service Designation OM-270

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Piston Oils