Plastic Safe Electrical Cleaner - 8 wt oz Spray Can
Introducing the NSF Certified Contact Cleaner, engineered for precision and reliability in electronics maintenance. With a fast-evaporating formula that leaves no residue, this product is your trusted solution for ensuring optimal performance and longevity of your equipment.
Features:
- Safe on plastics: Rest assured, our formula is gentle yet effective on a wide range of materials.
- Fast Evaporating Formula: Leaves no messy residue behind, saving you time and effort in cleanup.
- Non-Flammable: Engineered for safety, providing peace of mind during application.
- Formulated for Contact Cleaning: Specifically designed to target and remove contaminants from connectors, electrical contacts, magnetic heads, and more.
- NSF Certified: Our product meets the rigorous standards of NSF International, ensuring quality and reliability. (K2 Registration #167855)
- VOC Compliant: Approved for use in all 50 states, meeting stringent environmental regulations.
Applications:
- Ideal for use on connectors, electrical contacts, magnetic heads, office equipment, printed circuit boards, printers, relays, solenoids, and more.
Specifications and Approvals:
- NSF International, K2 certified.
Properties:
- Appearance / Physical State: Aerosol.
- Color: Colorless.
- Odor: Mild, Ether-like.
- Boiling Point / Range: 136.4°F (58°C)
- Flash Point: None (TCC)
- Evaporation Rate: Greater than 1 (Ethyl Ether = 1)
- Vapor Density: 7
- Water Solubility: Less than 5% w/w
- Density: 11.60
- Heat of Combustion: Less than 20 kJ/g
- Percent Volatile: 100%
- Specific Gravity: 1.39 @ 25°C
- VOC Content: 42% per California Consumer Product Regulations
- Propellant: HFO-1234ze, carbon dioxide
Directions for Use:
- DO NOT use on energized electrical equipment or equipment in operation. Allow the surface to dry before restarting.
- Hold the can 6-8 inches away and spray directly on the surface to clean.
- Test on a small inconspicuous area or similar expendable component prior to use to assure material compatibility.
- Lubricate and protect the clean surface with your choice of LPS® lubricants and corrosion inhibitors.
Handling:
- DO NOT spray into or around ignition sources.
- After handling, always wash hands thoroughly with soap and water.
- Use only with adequate ventilation.
- Avoid breathing vapors or spray mists.
- Avoid contact with eyes, skin, and clothing.
- Ground and bond containers before transferring materials.
Storage:
- Keep the container in a cool, dry, well-ventilated area.
- Avoid all sources of ignition (spark or flame).
- Store below 120°F.
Disposal:
- Dispose of contents in accordance with local/state/national waste disposal regulations.
Invest in the best for your electronics maintenance needs with our NSF Certified Contact Cleaner. Order now and experience the difference in performance and reliability!